What are the precautions of glass door handles installation?

All doors have handles, and glass doors are no exception. The glass door handle not only facilitates us to open and close the door, but also can be used for decoration. Therefore, the installation of the glass door handle is essential. How to install the glass door handle? Let's take a look at the following steps.

 

 

1. Be Careful When Installing Glass Door Handles.

 

Many of our homes or some public places use glass doors for partition and decoration. First of all, we still have to acknowledge the aesthetics of glass doors, and the choice of door knobs must also be particular. The function of the door is actually a good partition, and it also needs to be opened and closed frequently, so the exterior door knob is very important. Glass doors are different from other doors. Wooden door handles are relatively easy to install, because even mistakes will not cause any damage to the door itself, but glass doors are very different in this respect. Compared with the wooden door, the glass door is very fragile, because the glass will be damaged if you are not careful during installation, so the loss is really not small, which means that we need to pay attention to many details.

 

 

2. How to Install the Glass Door Handle?

 

1) Punch

For all-glass doors, the glass door should be perforated. The perforation of the glass door is usually done when the glass is cut. The hole used by the glass door handle should first be made smaller, and then slowly made large. It is best to loosen the door pull slightly when installing it, not too loose, otherwise the door handle ring is easy to be fixed.

 

2) Glue

Before installing the glass door knob, apply a proper amount of glass glue around the part of the door handle that penetrates the glass door.

 

3) Fix

Wrap the insertion part of the internal door handle with soft tape to fix the door handle, and then assemble the modern door handle so that the root of the door handle is close to the glass and then tighten the fixing screws to ensure that the handle is not loose.

 

4) Treatment

If it is not tempered glass door, use a 10mm glass drill to measure the hole distance (center to center) of the glass door handle, mark it on the glass door, water it and make a hole, install it from the outside first, and screw it inside. Don't leave the screws of the handle outside, so that the glass door handle can be removed from the outside.

 

 

3. Precautions for Installing Glass Door Handle.

 

First of all, we must use auxiliary tools during the installation process, such as our commonly used screwdrivers. Then we must pay attention not to cause the auxiliary tools to damage the glass door because of our excessive force.

 

Secondly, there are many types of front door handles. Most glass doors leave slots for installers to install the handles. We need to choose a handle of the right size for installation.

 

Finally, most door levers are also detachable. First disassemble the door handle and then pass the handle through the slot and fix it with auxiliary tools. For glass doors, there are many details that are different from ordinary doors. In order not to affect the normal installation time, you should make it clear that you should buy the suitable glass door handles. When installing, try to lighten your actions. Don't use too many sharp auxiliary tools to prevent damage due to mistakes.